CSCS Electrical Safety and Hand Held Tools and Equipment Questions For Operatives

Written By: Ryan - Admin
Updated on: February 15, 2023

For section C: Safety of the CSCS Test for operatives you will need to have a knowledge of Electrical Safety and Hand Held Tools and Equipment. Here below we have 33 questions on this subject for you to revise.

These will give you an idea of all the questions you will need to know for the real exam.

If you would like to take a full 50 question CSCS mock test click here.

Electrical Safety and Hand Held Tools and Equipment Questions

1. When do you need to check tools and equipment for damage?

Question 1 of 33

2. You are using electric equipment when it cuts out You should:

Question 2 of 33

3. It is safe to work close to an overhead power line if:

Question 3 of 33

4. Before you adjust an electric hand tool you should:

Question 4 of 33

5. What is the main danger if you use a chisel or bolster with a 'mushroomed' head?

Question 5 of 33

6. If you need to use a power tool with a rotating blade, you should:

Question 6 of 33

7. It is dangerous to run an abrasive wheel faster than its recommended top speed Why?

Question 7 of 33

8. You need to run an electrical cable across an area used by vehicles What TWO things should you do?

Question 8 of 33

9. If an extension cable has a cut in its outer cover, you should:

Question 9 of 33

10. The Portable Appliance Testing (PAT) label on a power tool tells you:

Question 10 of 33

11. How do you check if a RCD (residual current device) connected to a power tool is working?

Question 11 of 33

12. Someone near you is using a disc-cutter to cut concrete blocks What THREE immediate hazards are likely to affect you?

Question 12 of 33

13. You must be fully trained before you use a cartridge-operated tool Why?

Question 13 of 33

14. Someone near you is using a rotating laser level What, if any, is the health hazard likely to affect you?

Question 14 of 33

15. Untidy leads and extension cables are responsible for many trips and lost work time injuries What TWO things should you do to help?

Question 15 of 33

16. If the guard is missing from a power tool you should:

Question 16 of 33

17. What is the best way to protect an extension cable while you work, as well as minimising trip hazards?

Question 17 of 33

18. Do you need to inspect simple hand tools like trowels, screwdrivers, saws and hammers?

Question 18 of 33

19. Why should you try to use battery-powered tools rather than electrical ones?

Question 19 of 33

20. You need to work near an electrical cable The cable has bare wires What should you do?

Question 20 of 33

21. Why do building sites use a 110 volt electricity supply instead of the usual 230 volt domestic supply?

Question 21 of 33

22. If you need to use a hand tool or power tool on site it must be:

Question 22 of 33

23. Most cutting and grinding machines have guards What are the TWO main functions of the guard?

Question 23 of 33

24. The colour of a 110 volt power cable and connector should be:

Question 24 of 33

25. What are the TWO main areas of visual inspections you should carry out before each use of a power tool?

Question 25 of 33

26. To operate a powered hand tool, you must be:

Question 26 of 33

27. You need to use a 230 volt item of equipment How should you protect yourself from an electric shock?

Question 27 of 33

28. You should use a RCD (residual current device) with 230 volt tools because it:

Question 28 of 33

29. You need to use an extension cable What TWO things must you do?

Question 29 of 33

30. On building sites, the recommended safe voltage for electrical equipment is:

Question 30 of 33

31. Look at these statements about power tools Which one is true?

Question 31 of 33

32. If the head on your hammer comes loose you should:

Question 32 of 33

33. You need to use an air-powered tool Which of these is NOT a hazard?

Question 33 of 33


 

Click on a star to rate it!

Average rating 5 / 5. 6

No votes so far! Be the first to rate this post.

Why Not Try Out These Tests Next

Leave a Reply to Ahmedalaziz Cancel reply

Your email address will not be published. Required fields are marked *

3 comments on “CSCS Electrical Safety and Hand Held Tools and Equipment Questions For Operatives”

  3. Very helpful
    Will be glad to give a donation later, hopefully
    After I’ve passed the test thanks very much mark

    Reply
ConstructionExam.co.uk is not associated or part of any scheme
or organisation such as the CSCS, CPCS or CITB. The only intention of this website is to
provide information about these schemes and their assessments.
? linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram