CSCS Electrical Safety and Hand Held Tools and Equipment Questions For Operatives

Written By: Ryan - Admin
Updated on: May 24, 2024

For section C: Safety of the CSCS Test for operatives you will need to have a knowledge of Electrical Safety and Hand Held Tools and Equipment. Here below we have 33 questions on this subject for you to revise.

These will give you an idea of all the questions you will need to know for the real exam.

If you would like to take a full 50 question CSCS mock test click here.

Electrical Safety and Hand Held Tools and Equipment Questions

1. Why should you try to use battery-powered tools rather than electrical ones?

Question 1 of 33

2. Before you adjust an electric hand tool you should:

Question 2 of 33

3. If you need to use a hand tool or power tool on site it must be:

Question 3 of 33

4. You should use a RCD (residual current device) with 230 volt tools because it:

Question 4 of 33

5. If the head on your hammer comes loose you should:

Question 5 of 33

6. What is the best way to protect an extension cable while you work, as well as minimising trip hazards?

Question 6 of 33

7. You need to run an electrical cable across an area used by vehicles What TWO things should you do?

Question 7 of 33

8. You need to use an air-powered tool Which of these is NOT a hazard?

Question 8 of 33

9. Why do building sites use a 110 volt electricity supply instead of the usual 230 volt domestic supply?

Question 9 of 33

10. You must be fully trained before you use a cartridge-operated tool Why?

Question 10 of 33

11. You are using electric equipment when it cuts out You should:

Question 11 of 33

12. It is safe to work close to an overhead power line if:

Question 12 of 33

13. Do you need to inspect simple hand tools like trowels, screwdrivers, saws and hammers?

Question 13 of 33

14. You need to use an extension cable What TWO things must you do?

Question 14 of 33

15. Look at these statements about power tools Which one is true?

Question 15 of 33

16. Someone near you is using a disc-cutter to cut concrete blocks What THREE immediate hazards are likely to affect you?

Question 16 of 33

17. What are the TWO main areas of visual inspections you should carry out before each use of a power tool?

Question 17 of 33

18. It is dangerous to run an abrasive wheel faster than its recommended top speed Why?

Question 18 of 33

19. If the guard is missing from a power tool you should:

Question 19 of 33

20. You need to use a 230 volt item of equipment How should you protect yourself from an electric shock?

Question 20 of 33

21. On building sites, the recommended safe voltage for electrical equipment is:

Question 21 of 33

22. If an extension cable has a cut in its outer cover, you should:

Question 22 of 33

23. Someone near you is using a rotating laser level What, if any, is the health hazard likely to affect you?

Question 23 of 33

24. You need to work near an electrical cable The cable has bare wires What should you do?

Question 24 of 33

25. The Portable Appliance Testing (PAT) label on a power tool tells you:

Question 25 of 33

26. Most cutting and grinding machines have guards What are the TWO main functions of the guard?

Question 26 of 33

27. How do you check if a RCD (residual current device) connected to a power tool is working?

Question 27 of 33

28. When do you need to check tools and equipment for damage?

Question 28 of 33

29. What is the main danger if you use a chisel or bolster with a 'mushroomed' head?

Question 29 of 33

30. Untidy leads and extension cables are responsible for many trips and lost work time injuries What TWO things should you do to help?

Question 30 of 33

31. If you need to use a power tool with a rotating blade, you should:

Question 31 of 33

32. The colour of a 110 volt power cable and connector should be:

Question 32 of 33

33. To operate a powered hand tool, you must be:

Question 33 of 33


 

Click on a star to rate it!

Average rating 5 / 5. 6

No votes so far! Be the first to rate this post.

Why Not Try Out These Tests Next

Leave a Reply

Your email address will not be published. Required fields are marked *

3 comments on “CSCS Electrical Safety and Hand Held Tools and Equipment Questions For Operatives”

  3. Very helpful
    Will be glad to give a donation later, hopefully
    After I’ve passed the test thanks very much mark

    Reply
ConstructionExam.co.uk is not associated or part of any scheme
or organisation such as the CSCS, CPCS or CITB. The only intention of this website is to
provide information about these schemes and their assessments.
? linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram